Stainless Steel Car Parking Markers

*** ATTENTION - CONTACT US FOR THE BEST DELIVERY COST ON SMALL ORDERS ***

Stainless Steel Car Parking Markers

Stainless steel markers for the demarcation of car parking spaces. Our high-quality stainless steel markers have been designed to be simple to install and very durable. Our steel parking bay markers are designed to be used across our range of honeycomb gravel stabilisation grids; Nidagravel 129, 129 XL, 130, 139 XL and 140. Our highest compressive strength honeycomb gravel grid, Nidagravel 140, is suitable to use for surfacing commercial car parking bays where a stable and free-draining gravel surface is required for aesthetic reasons and/or to comply with Sustainable Urban Drainage (SuDS) requirements.

Nidagravel stainless steel markers can also be used successfully with Nidagravel 129 and Nidagravel 130, our standard gravel stabilisation grid for residential or private driveways where customers would like to mark out a number of car parking spaces.

Nidagravel square markers are made from Grade 304 stainless steel for the faceplate with two mild steel pins welded to the underside. Our car parking markers are designed to be fitted after the Nidagravel gravel stabilisation grids have been installed and filled with gravel, so the parking bay markers can either be installed straight away on a new project or simply retrofitted at a later date. In each case, the positioning of the markers is decided upon and then the markers are simply driven through the gravel grids and into the sub-base using a rubber-faced mallet to secure them in place. The markers are designed to be installed into a granular sub-base. In tough ground conditions, mark the pin positions on the top of the sub-base and pre-drill with a long 8mm masonry bit, then tap marker into position.

FREQUENTLY ASKED QUESTIONS:
Click here to see answers to questions about Nidagravel

CASE STUDIES
View some great projects using our gravel grids

HOW WE DELIVER:
Click here to see how your Nidagravel order will be delivered

NIDAGRAVEL STAINLESS STEEL MARKERS

Marker plate dimensions: 100mm x 100mm x 10mm (L x W x H)

Marker plate thickness: 10mm (approx)

Stainless steel thickness: 2mm (approx)

Fixing pins length: 200mm (approx)

Marker plate material: Stainless steel

Fixing pin material: Mild steel

No. of fixing pins: 2 per marker

Colour: Silver / Stainless steel

Packaging: 50 markers per box (no minimum order qty)

Delivery: Despatched on a standard pallet (Up to 500 markers per pallet)